TIP:How to test Hard disk drive speed-Measure its transfer rate and performance
Ever wondered how fast is your current hard disk ? Every time you buy a new hard drive for your system.. do you really know its advantages over the old one ? For many it doesn't matter how fast their hard disk drive is until their computer is working for them but still many are out there who would like to know about their new SATA II HDD's performance and speed. Here I will specify few ways to know about speed and performance of any type of hard disk
Well, there are free tools available for both.. Linux and windows . By using them you can get to know about speed and performance as well general information of your hard disk drives. Sometimes these tools can also help you to diagnose problems related to your computer's performance those are mainly due to hard drive's poor performance.
How to Check Hard disk drive speed , performance and information in Windows Machine
_________________________________________________
If you are running a computer with Microsoft windows 2000, windows xp, windows vista etc. then you can download a free tool called as HDtune to know about your hard disk as well as test its speed.
After install you can run benchmark test which will tell you your hard drives Maximum transfer speed, Minimum transfer speed and Average Transfer speed. It will also tell you access time. Apart of that, this tool lets you know all information you may ever need about a hard drive, including its buffer, its all features etc and current hard drive temperature. As this tool provide more advance options, you can use them later on when you really need. You can also use its "Error Scan" feature to know more about health status of your HDD.
You can download HDtune from here : HD Tune Free Download
(Note: There is one paid version too of HD tune named as HDtune Pro but you need to download only HD tune ie freeware)
How to check Hard disc drive performance in Linux
_________________________________________________
There is a small utility available named "hdparm". It is there with most of the Linux Distributions as standard utility but if you don't have it then you can download and install it from here :hdparm latest package download
Once it is installed or it is already there then you need to run following command :
Code:
hdparm -Tt /dev/hdX
Above you need to replace "X" with your drive later, in my case it goes like this :
Code:
hdparm -Tt /dev/hda
and it produced following output:
Code:
[Timing cached reads: 1896 MB in 2.00 seconds = 947.20 MB/sec
Timing buffered disk reads: 168 MB in 3.01 seconds = 55.79 MB/sec
To get more information about your hard disk drive, you can use following commands but they will be daunting to a normal user but can be helpful to diagnose and know about hard drive:
To know general information about your drive like its make, supported modes etc.
To know about the current operating flags ie. mode the HD is working:
Lastly:
_________________________________________________
If you find my TIP / article informative and useful then please stop by and give your valuable comment. Also you can always ask any question related to this article tip here and I will be more than happy to answer them.
Thank you!
~Ricky
_________________________________________________
Disclaimer
The author is not associated with any of the above mentioned service or product. Author may or may not be using all or any of the above services or products. Above article / review / tip are just views of the author and they do not decide above mentioned service / product's characteristics as whole. The author do not take any responsibility for harm or damage done by any of the above tip / advice / review. Above material / article is provided for the informational purpose only and author can't be held responsible for its usability and authenticity. Reader's discretion is advised.
Stealing or Copying of this article / review / Tip without proper credit and link back to the article is illegal. You may use this article at your site by giving a link back to this article or by asking for permission from the author.
Re: TIP:How to test Hard disk drive speed-Measure its transfer rate and performance
Thank U Ricky sir for sharing it with us.. :)
Its realy very easy to understand the whole process.
Re: TIP:How to test Hard disk drive speed-Measure its transfer rate and performance
Hi Nupur, thanks for your complimentary words, I hope you enjoyed it :)
Re: TIP:How to test Hard disk drive speed-Measure its transfer rate and performance
thanks. this is a very good article
Re: TIP:How to test Hard disk drive speed-Measure its transfer rate and performance
Ahh...
The good old HD tune thing... :)
Besides allowing to check read thrououghputs, This neat software can also monitor Temperature and SMART values...Keep and eye out for them!
My 1 TB QUAD RAID 0 :D array shows a whooping 350 MB/s :o speed and 289MB/s Minimum speed !! 8) ;D :o
Re: TIP:How to test Hard disk drive speed-Measure its transfer rate and performance
Running 1 TB Quad RAID 0 on personal workstation ?
That is cool :)
Actually nice to see someone techi on eTI :)
Re: TIP:How to test Hard disk drive speed-Measure its transfer rate and performance
Quote:
Originally Posted by Ricky
Running 1 TB Quad RAID 0 on personal workstation ?
That is cool :)
Actually nice to see someone techi on eTI :)
Thanks mate,
My 1 TB Quad raid station with Single core processor can beat the hell outta any Quad Core processor with single hard disk! ;)
People fail to see hard disks are most important part of any computer!
Re: TIP:How to test Hard disk drive speed-Measure its transfer rate and performance
That is really cool! haha